Lane Shark Brush Cutters are designed to work with a wide range of tractors. However, there are certain specifications your tractor must meet to operate the cutters effectively and safely. The LS 3 model requires a tractor with a minimum rear wheel width of 55", a minimum dry weight of 2,000 lbs, and a hydraulic pump flow rate of 5.5 - 8.5 gallons per minute (GPM) The LS 2(4' model) also requires a minimum rear wheel width of 55", a minimum dry weight of 3,000 lbs, and the hydraulic pump flow rate should be between 8.5 - 20 GPM. To make things easier for you, we've developed a handy "Find Your Fit" tool. Here you can input your tractor model, loader model, and cab type, and the tool will tell you if a Lane Shark Brush Cutter is compatible with your tractor.

Fit Your Fit Tool

When it comes to operating a Lane Shark Brush Cutter, the tractor's hydraulic pump flow (GPM) is often more crucial than its HP. For the LS 3 model, it's generally suited for tractors with 25-40 HP. More importantly, it requires a hydraulic pump flow rate of 5 to 8.5 GPM. On the other hand, the LS2 model is designed for tractors ranging from 40 HP to 100 HP, with a required pump flow rate of 8.5 GPM to 20 GPM. However, GPM is just one of the three key factors to consider when determining if your tractor is compatible with a Lane Shark Brush Cutter. Refer to the "Find Your Fit" page, to ensure compatibility with your tractor.

The tractor will need to be equipped with a 3rd function. We offer 3rd function valve kits, C-flow (continuous flow) valve kits, and switch boxes for existing 3rd functions. You can visit our store where you can browse our hydraulic solutions or find a dealer near you.

The cutting capacity of the Lane Shark cutters truly stands out with its ability to handle brush up to 3" in diameter. It effortlessly cuts through a variety of plant materials, including saplings, brush, and tree limbs, making it a powerful tool for maintaining trails, roadsides, pond edges, hunting lanes, and more. With Lane Shark, keeping your property clean and manageable is no longer a strenuous task. Visit our Youtube channel to see the Lane Shark in Action.

It's important to note that Lane Shark Brush Cutters are not designed for use with skid steers. Doing so not only presents a significant safety hazard, but it also voids the warranty of your Lane Shark. Ensuring proper equipment compatibility is crucial to maintaining the safety, efficiency, and longevity of your brush cutter. Please remember to use your Lane Shark Brush Cutter only with compatible tractors, as stated in the product specifications.

While having a cabbed tractor can add an extra layer of protection for the operator, it's not a mandatory requirement for using a Lane Shark Brush Cutter. The unique design of the Lane Shark ensures that the blade's counterclockwise rotation throws debris downwards and away from the operator when cutting in the vertical position and towards the 10/11 o'clock direction in the horizontal position. Despite this, we strongly recommend that operators wear appropriate Personal Protective Equipment (PPE) at all times to ensure their safety while operating the Lane Shark Brush Cutter.

While your Lane Shark Brush Cutter will arrive fully assembled and ready for installation, please note that it does not come with the hydraulic components necessary to plumb the cutter to your tractor. These components must be sourced separately. Ensuring you have the correct hydraulic setup for your specific tractor model is vital to the effective operation of your Lane Shark Brush Cutter. Click the button for our 3rd function and hydraulic options.

It is essential to note that the return line of a Lane Shark Brush Cutter must never be plugged directly back into your 3rd function valve. This includes the rear remote valve. Improper plumbing of this kind will likely cause overheating issues, compromising the operation and lifespan of your equipment. If your tractor has a WR Long 3rd function, our Lane Shark C-Flow Kit is the ideal solution for setting up the return line correctly. For tractors equipped with any other brand of 3rd function, the return line should go directly to the tractor's sump. Following these guidelines will ensure the efficient and safe use of your Lane Shark Brush Cutter.

Diverter valves are not compatible with the Lane Shark. To power your Lane Shark, it is required to use a 3rd function valve. While rear remotes might seem like an alternative, we advise against their use because there's a risk that some loaders may lose priority. Ensuring correct and compatible hydraulic setup for your Lane Shark will support optimal functionality and longevity of the product.

No, the high capacity motor isn't inherently more powerful than the standard motor. Its design primarily caters to a higher hydraulic pump flow that your tractor may produce. The standard capacity is designed for a pump flow of 8.5 to 15 gpm, whereas the high capacity motor accommodates a pump flow range of 15 to 20 gpm. If you're unsure about which motor is required for your tractor, make use of our "Find Your Fit" tool. It will provide guidance on whether your tractor needs the high capacity motor to operate the Lane Shark Brush Cutter effectively.

Find Your Fit Tool

Yes, you can. The Lane Shark and your rear Brush Hog use different power sources on your tractor. While the Lane Shark leverages the tractor's hydraulic system, the Brush Hog utilizes the tractor's power take-off (PTO).

We always recommend working through a Lane Shark dealer for your purchase to ensure correct installation and maintenance. You may purchase directly from Lane Shark if you are outside of an authorized dealer's territory.

Dealer Locator

Not necessarily, but our Switch Box is designed to work optimally with MOST 3rd function hydraulic setups. That said, certain configurations, such as systems with "stacked valves," could potentially result in hydraulic priority issues. These issues might affect the performance of the Lane Shark and result in a loss of loader function while the Lane Shark is operating. If your tractor employs a stacked valve setup, we can't guarantee that the loader will receive hydraulic flow priority over the Lane Shark when using a Switch Box. Before purchasing and installing, it's essential for customers to assess their specific tractor setup, considering factors such as stacked valve configurations. If you're unsure, our service department is always ready to assist you in determining your needs. For tractors with specific setups like these, we can offer an alternative solution: our 3rd Function C-Flow kits, which are designed to avoid losing loader priority issues. By considering these factors, you can ensure a seamless integration of the Switch Box or an alternative solution with your tractor.